CT GDL280
Fuel Cell / Electrochemical Research Material
제품 안내
CT GDL280 is a carbon paper with a Microporous Layer (MPL) and with PTFE. It has a total thickness of 280 um (microns). CT is a great low-cost alternative to conventional carbon paper Gas Diffusion Layer (GDL) materials. CT GDL280 is available in 20 x 20 cm or 40 x 40 cm sheets at this time. Advantages of CT Carbon Paper: Heat transfer during cell operation Automated QC inspection system Keep some water on the surface for conductivity Avoid “flooding” CT GDL280 has a current lead time of about 3 - 4 weeks to ship. How to Select a GDL: The following table provides a guideline for selection of GDLs as a function of the application itself. Scientific Literature Relevant to This Product: An article by Duong et al. entitled "Improving the Immobilization of Glucose Oxidase on Carbon Cloth Via a Hybrid Approach of Cross-Linked Chitosan/TPP Matrices with Na Polymers for High-Performance...
본 제품은 연료전지, 수전해, 전기화학 및 에너지 소재 연구 분야에서 활용되는 전문 연구용 소재입니다. 제품별 상세 사양, 재고 현황 및 적용 가능 여부는 문의 후 확인 가능합니다.
Specifications
| Gas Diffusion Layer Properties |
|---|
| Material Type | Carbon Fiber Paper |
|---|
| Thickness | 0.28 mm (280 microns) |
|---|
| Basic Weight (g/m²) | 100 |
|---|
| Air Permeability (s) | < 200 |
|---|
| Electrical Resistivity (through plane) | < 10 mΩcm² |
|---|
| Tensile Strength | MD: 37 N/cm and XD: 33 N/cm |
|---|
| Flexural Modulus (MPa) | MD: 4000 MPa and XD: 1400 MPa |
|---|
| Substrate PTFE Treatment | Yes |
|---|
| Microporous Layer | Yes |
|---|
