Freudenberg H23C3
Fuel Cell / Electrochemical Research Material
제품 안내
Freudenberg H23C3 is a flexible and easy to use carbon paper Gas Diffusion Layer (GDL) with a Microporous Layer (MPL) as well as a hydrophobic treatment. It is recommended for low humidity systems, open cathode designs and air systems. It is 235 um (microns) thick @ 1 MPa compression. Freudenberg H23C3 is designed to keep the membrane wet. It is used in high temperature or very dry fuel cell applications. Freudenberg H23C3 is recommended for: - Power densities up to 0.5A/cm² - Stationary CHP Low humidified cathodes - Low Temperature Polymer Electrolyte Fuel Cell (LT-PEMFC) Backup, Air-cooled, and Off-Grid applications Freudenberg H23C3 is formerly known as H2315 I2 C3. Freudenberg Carbon Paper GDL Properties Sheet Freudenberg Fuel Cell and Electrolyzer Carbon Paper GDLs SDS
본 제품은 연료전지, 수전해, 전기화학 및 에너지 소재 연구 분야에서 활용되는 전문 연구용 소재입니다. 제품별 상세 사양, 재고 현황 및 적용 가능 여부는 문의 후 확인 가능합니다.
Specifications
| Gas Diffusion Layer Properties |
|---|
| Material Type | Carbon Fiber Paper |
|---|
| Thickness | .235 mm (235 microns) @ 1 MPa Compression |
|---|
| Air Permeability (s) | 15 (TP Air Permeability acc. to Gurley (ISO 5636-5)) |
|---|
| Electrical Resistivity (through plane) | 9 mΩ/cm² (TP Electrical Resistance @ 1 MPa compression) |
|---|
| Substrate PTFE Treatment | Yes, (proprietary PTFE % value) |
|---|
| Microporous Layer | Yes, on one side (with proprietary PTFE % value) |
|---|
