Sigracet 22 AA
Fuel Cell / Electrochemical Research Material
제품 안내
Manufacturer has renamed Sigracet 29 AA to Sigracet 22 AA. Specifications are unchanged. Sigracet 22 AA is a non-woven carbon paper gas diffusion media that has no PTFE treatment. It has a total thickness of 180 um (microns). SGL AA is a great low-cost alternative to conventional woven carbon paper Gas Diffusion Layer (GDL) and Gas Diffusion Media materials. The Sigracet Carbon Fiber Paper 22 Series is intended to combine the required production robustness and the excellent performance properties. Stack developers and assemblers are benefiting from the following greatly improved characteristics: Greatly improved homogeneity inter-lot and intra-lot. The overall variability has been shown to be better than +/- 10% (2 sigma) Greatly improved surface flatness Greatly reduced occurrence of faulty spots on a roll Best performance under various operating conditions
본 제품은 연료전지, 수전해, 전기화학 및 에너지 소재 연구 분야에서 활용되는 전문 연구용 소재입니다. 제품별 상세 사양, 재고 현황 및 적용 가능 여부는 문의 후 확인 가능합니다.
Specifications
| Gas Diffusion Layer Properties |
|---|
| Material Type | Carbon Fiber Paper |
|---|
| Thickness | 180 microns +/- 20 microns |
|---|
| Basic Weight (g/m²) | 32 +/- 7 g/m² |
|---|
| Porosity (%) | 80% |
|---|
| Compressibility | ca. 34% (at 1 MPa) |
|---|
| Electrical Resistivity (through plane) | < 5 mΩcm² (milliohms cm²) |
|---|
| IP Pressure Drop | < 0.4 bar (at 1 MPa) |
|---|
| Substrate PTFE Treatment | No PTFE Treatment Applied |
|---|
| Microporous Layer | No Microporous Layer Applied |
|---|
