CT Carbon Cloth with MPL - W1S1011
Fuel Cell / Electrochemical Research Material
제품 안내
CT is a woven carbon cloth with a Microporous Layer (MPL). It has a total thickness of 410 um (microns). CT is a great low-cost alternative to conventional woven carbon cloth Gas Diffusion Layer (GDL) materials. Advantages of CT Carbon Cloth: Stable MPL slurry with sophisticated coating technology High compressibility (up to 100kg/cm²) Automated QC inspection system Reduce catalyst slurry permeation Avoid “flooding” Fuel Cell Test Data: The following test data was kindly supplied by the GDL manufacturer as an exemplary single cell fuel cell test data based on the following conditions: Active area: 25 cm2 Anode Fuel: H2 Anode flow rate (constant flow): 1.5 SLPM Cathode Fuel: Air Cathode flow rate (constant flow): 2.5 SLPM Anode/Cathode Humidification Temperature: 65 C Fuel/Oxidant Reactant Relative Humidity: 90% Fuel Cell Temperature: 60 C Back pressure: None Gasket Height: 260...
본 제품은 연료전지, 수전해, 전기화학 및 에너지 소재 연구 분야에서 활용되는 전문 연구용 소재입니다. 제품별 상세 사양, 재고 현황 및 적용 가능 여부는 문의 후 확인 가능합니다.
Specifications
| Gas Diffusion Layer Properties |
|---|
| Material Type | Woven Carbon Fiber Cloth |
|---|
| Thickness | 0.410 mm (410 microns) |
|---|
| Basic Weight (g/m²) | 200 |
|---|
| Air Permeability (s) | <55 |
|---|
| Electrical Resistivity (through plane) | < 13 mΩcm² |
|---|
| Tensile Strength | MD: 10 N/cm XD: 5 N/cm |
|---|
| Substrate PTFE Treatment | Yes |
|---|
| Microporous Layer | Yes, on one side |
|---|
0
