Polyethylene Linear low density, melt index 1.0 g/10 min (190°C/2.16kg)

Polyethylene low density, melt index 25 g/10 min (190°C/2.16kg)

Polyethylene Medium density

Polyethylene Naphthalate (PEN), granule, 5 mm nominal granule size, weight 100 g, condition additive free polymer

Polyethylene oxide United States Pharmacopeia (USP) Reference Standard

Polyethylene stopper joint: ST/NS 14/20

Polyethylene stopper joint: ST/NS 24/40

Polyethylene Terephthalate (polyester, PET, PETP), fiber, tex number 3.3, L 100 m, filament diameter 0.014mm

Polyethylene Terephthalate (polyester, PET, PETP), film, thickness 0.013 mm, size 300 × 300 mm, clear clear

Polyethylene Terephthalate (polyester, PET, PETP), film, thickness 0.05 mm, size 300 × 300 mm, clear clear

Polyethylene Terephthalate (polyester, PET, PETP), film, thickness 0.1 mm, size 300 × 300 mm, clear clear

Polyethylene Terephthalate (polyester, PET, PETP), film, thickness 0.175 mm, size 600 × 600 mm, clear clear

Polyethylene Terephthalate (polyester, PET, PETP), sheet, thickness 2 mm, size 300 × 300 mm, clear clear

Polyethylene terephthalate G United States Pharmacopeia (USP) Reference Standard

Polyethylene terephthalate United States Pharmacopeia (USP) Reference Standard

Polyethylene Ultra-high molecular weight, average Mw 3,000,000-6,000,000

Polyethylene Ultra-high molecular weight, surface-modified, powder, 125 μm avg. part. size

Polyethylene Ultra-high molecular weight, surface-modified, powder, 34-50 μm particle size

Polyethylene-block-poly(ethylene glycol) average Mₙ ~1,400

Polyethylene-block-poly(ethylene glycol) average Mₙ ~575

Polyethyleneglycol Bisphenol A Epichlorohydrin Copolymer mol wt 15,000-20,000 Da

Polyethylenimine hydrochloride linear, average Mₙ 10,000, PDI ≤1.5

Polyethylenimine hydrochloride linear, average Mₙ 15,000, PDI <1.4

Polyethylenimine hydrochloride linear, average Mₙ 4,000, PDI ≤1.3

Polyethylenimine, 80% ethoxylated solution 37 wt. % in H₂O

Polyethylenimine, branched average Mw ~25,000 by LS, average Mₙ ~10,000 by GPC, branched

Polyethylenimine, branched average Mw ~800 by LS, average Mₙ ~600 by GPC

Polyethylenimine, linear average Mₙ 10,000, PDI ≤1.3

Polyethylenimine, linear average Mₙ 2100, PDI <1.3

PolyFreeze Tissue Freezing Medium clear

Polygalacturonic acid sodium salt from citrus fruit, ≥75% (titration)

Polygalacturonic acid ≥85% (titration), from oranges

Polygalacturonic acid ≥90% (enzymatic)

Polygalaxanthone III phyproof® Reference Substance

Polyglycine mol wt 500-5,000

Polyglycolide inherent viscosity 1.4dL/g

Polyguanylic acid potassium salt lyophilized powder

Polyimide (PI), film, thickness 0.125 mm, size 150 × 150 mm, grade kapton hn

Polyimide (PI), film, thickness 0.125 mm, size 300 × 300 mm, grade kapton hn

Polyimide (PI), film, thickness 0.23 mm, size 140 × 150 mm, grade cirlex cl

Polyimide (PI), laminate, thickness 0.4 mm, size 150 × 150 mm, polymer thickness 0.025mm

Polyimide (PI), tube, outside diameter 3.0mm, L 1000 mm, wall thickness 0.03 mm

Polyinosinic acid potassium salt Homopolymer

Polyinosinic–polycytidylic acid potassium salt with buffer salts, TLR ligand tested

Polyinosinic–polycytidylic acid sodium salt TLR ligand tested