Poly(methyl methacrylate) standard ReadyCal set Mₚ ~800-2′200′000 suitable for gel permeation chromatography (GPC)

Poly(methyl methacrylate), isotactic >80% isotactic

Poly(methyl methacrylate-co-ethyl acrylate) ethyl acrylate <5 wt. %, average Mₙ ~39,500 by GPC, average Mw ~101,000 by GPC, powder

Poly(methyl methacrylate-co-methacrylic acid) average Mw ~34,000 by GPC, average Mₙ ~15,000 by GPC

Poly(methyl vinyl ether-alt-maleic acid) average Mw ~1,980,000 by LS, average Mₙ ~960,000, powder

Poly(methyl vinyl ether-alt-maleic acid) average Mw ~216,000 by LS, average Mₙ ~80,000, powder

Poly(methyl vinyl ether-alt-maleic anhydride) average Mw ~1,080,000, average Mₙ ~311,000

Poly(methyl vinyl ether-alt-maleic anhydride) average Mw ~216,000, average Mₙ ~80,000

Poly(methylhydrosiloxane) average Mₙ 1,700-3,200

Poly(methylhydrosiloxane), trimethylsilyl terminated average Mₙ ~390

Poly(N,N-dimethylacrylamide), DDMAT terminated average Mₙ 10,000, PDI ≤1.1

Poly(N-isopropyl acrylamide) NHS ester end functionalized, average Mₙ 5,000

Poly(N-isopropylacrylamide) Mₙ ~40,000

Poly(N-isopropylacrylamide), amine terminated average Mn 2,500 (T)

Poly(N-isopropylacrylamide), amine terminated average Mₙ 5,500 (T)

Poly(N-isopropylacrylamide), azide terminated average Mₙ 15,000, PDI ≤1.4

Poly(N-isopropylacrylamide), carboxylic acid terminated average Mₙ 10,000

Poly(N-isopropylacrylamide), carboxylic acid terminated average Mₙ 2,000

Poly(N-isopropylacrylamide), carboxylic acid terminated average Mₙ 5,000

Poly(N-isopropylacrylamide), N-hydroxysuccinimide (NHS) ester terminated average Mₙ 2,000

Poly(N-isopropylacrylamide-co-butylacrylate) butylacrylate 12 mol %, average Mₙ 30,000

Poly(octadecyl methacrylate) solution average Mw ~170,000 by GPC, in toluene

Poly(oxy-1,4-phenyleneoxy-1,4-phenylenecarbonyl-1,4-phenylene)

Poly(oxy-1,4-phenylenesulfonyl-1,4-phenylene) melt index 6 g/10 min (380°C/2.16 kg)

Poly(oxy-1,4-phenylenesulfonyl-1,4-phenylene) pellets

Poly(propylene carbonate) average Mₙ ~50,000 by GPC

Poly(propylene glycol) average Mₙ ~1,000

Poly(propylene glycol) average Mₙ ~2,000

Poly(propylene glycol) average Mₙ ~2,700

Poly(propylene glycol) average Mₙ ~4,000

Poly(propylene glycol) average Mₙ ~425

Poly(propylene glycol) average Mₙ ~725

Poly(propylene glycol) bis(2-aminopropyl ether) average Mₙ ~2,000

Poly(propylene glycol) bis(2-aminopropyl ether) average Mₙ ~230

Poly(propylene glycol) bis(2-aminopropyl ether) average Mₙ ~4,000

Poly(propylene glycol) bis(2-aminopropyl ether) average Mₙ ~400

Poly(propylene glycol) diacrylate average Mₙ ~800, contains 100 ppm BHT as inhibitor, 100 ppm MEHQ as inhibitor

Poly(propylene glycol) diglycidyl ether average Mₙ ~380

Poly(propylene glycol) dimethacrylate average Mₙ ~560

Poly(propylene glycol) monobutyl ether average Mₙ ~1,000

Poly(propylene glycol), tolylene 2,4-diisocyanate terminated average Mₙ ~2,300 (narrow MW distribution), isocyanate ~3.6 wt. %

Poly(propylene glycol)-block-poly(ethylene glycol)-block-poly(propylene glycol) average Mₙ ~2,000

Poly(propylene glycol)-block-poly(ethylene glycol)-block-poly(propylene glycol) average Mₙ ~3,300

Poly(propylene sulfide) average Mw 15000

Poly(pyromellitic dianhydride-co-4,4′-oxydianiline), amic acid solution 11 wt. %±5 wt. % in NMP/aromatic hydrocarbons (80%/20% solvent ratio)