Poly(ethylene oxide) average Mᵥ ~900,000 (nominal), powder

Poly(ethylene oxide), 4-arm, thiol terminated average Mₙ 10,000, contains >40 ppm DTT as stabilizer

Poly(ethylene oxide)-block-poly(butylene oxide) PEG average Mₙ 2,000, average Mₙ 5,000 (PBO)

Poly(ethylene succinate) average Mw 10,000

Poly(ethylene terephthalate) granular

Poly(ethylene-alt-maleic anhydride) average Mw 100,000-500,000, powder

Poly(ethylene-co-glycidyl methacrylate) pellets, melt index 5 g/10 min (190°C/2.16kg)

Poly(ethylene-co-methyl acrylate-co-glycidyl methacrylate) pellets

Poly(ethylene-co-vinyl acetate) vinyl acetate 12 wt. %, melt index 8 g/10 min (190°C/2.16kg)

Poly(ethylene-co-vinyl acetate) vinyl acetate 18 wt. %, melt index 8 g/10 min (190°C/2.16kg), contains 200-900 ppm BHT as inhibitor

Poly(ethylene-co-vinyl acetate) vinyl acetate 40 wt. %, melt index (41-63 dg/min (190°C/2.16kg)), contains 190-910 ppm inhibitor

Poly(ethylene-vinyl acetate) United States Pharmacopeia (USP) Reference Standard

Poly(ethyleneimine) solution analytical standard, 50 % (w/v) in H₂O

Poly(ethyleneimine) solution average Mw 1800, 50 wt. % in H₂O

Poly(ethyleneimine) solution average Mₙ ~1,200, average Mw ~1300 by LS, 50 wt. % in H₂O

Poly(ethyleneimine) solution average Mₙ ~60,000 by GPC, average Mw ~750,000 by LS, 50 wt. % in H₂O

Poly(ethyleneimine) solution ~50% in H₂O

Poly(Glu, Tyr) sodium salt Glu:Tyr (1:1), mol wt 20,000-50,000

Poly(Glu, Tyr) sodium salt Glu:Tyr (4:1), mol wt 20,000-50,000

Poly(Glu, Tyr) sodium salt Glu:Tyr (4:1), mol wt 5,000-20,000

Poly(glycerol sebacate)

Poly(hexamethylene diisocyanate) viscosity 1,300-3,000 cP (25 °C)(lit.)

Poly(hexyl methacrylate) solution average Mw ~400,000 by GPC, in toluene

Poly(isobutylene-alt-maleic anhydride) average Mw ~6,000, 12-200 mesh (85%)

Poly(L-lactide) average Mₙ 40,000

Poly(lactide-co-glycolide)-b-poly(ethylene glycol)-b-poly(lactide-co-glycolide) average Mₙ (1,600-1,500-1,600), lactide:glycolide 75:25

Poly(lactide-co-glycolide)-block-poly(ethylene glycol)-block-poly(lactide-co-glycolide) average Mₙ (1100-1000-1100), lactide:glycolide 75:25

Poly(melamine-co-formaldehyde) methylated, solution average Mₙ ~432, 84 wt. % in 1-butanol

Poly(methacrylic acid, sodium salt) solution average Mw 4,000-6,000, 40 wt. % in H₂O

Poly(methacrylic acid, sodium salt) solution average Mₙ ~5,400, average Mw ~9,500 by GPC, 30 wt. % in H₂O

Poly(methyl acrylate) solution average Mw ~40,000 by GPC

Poly(methyl hydrogen siloxane) for synthesis

Poly(methyl methacrylate)

Poly(methyl methacrylate)

Poly(methyl methacrylate) analytical standard, 2,480,000

Poly(methyl methacrylate) analytical standard, suitable for gel permeation chromatography (GPC), 10,000

Poly(methyl methacrylate) analytical standard, suitable for gel permeation chromatography (GPC), 100,000

Poly(methyl methacrylate) analytical standard, suitable for gel permeation chromatography (GPC), 2,000

Poly(methyl methacrylate) analytical standard, suitable for gel permeation chromatography (GPC), 20,000

Poly(methyl methacrylate) analytical standard, suitable for gel permeation chromatography (GPC), 4,000

Poly(methyl methacrylate) analytical standard, suitable for gel permeation chromatography (GPC), 50,000

Poly(methyl methacrylate) analytical standard, suitable for gel permeation chromatography (GPC), 8,000

Poly(methyl methacrylate) analytical standard, suitable for gel permeation chromatography (GPC), average Mw 97,000 (Typical), average Mₙ 46,000 (Typical)

Poly(methyl methacrylate) average Mw ~15,000 by GPC, powder

Poly(methyl methacrylate) average Mw ~350,000 by GPC