Poly(1-decene), hydrogenated Mixture of trimer and tetramer

Poly(1-vinylnaphthalene) average Mw ~30,000, powder

Poly(1-vinylpyrrolidone-co-styrene) 38 % emulsion in H₂O, <0.5 μm particle size

Poly(1-vinylpyrrolidone-co-vinyl acetate) solution average Mw ~13,000 (GPC vs. poly(ethylene oxide)), 50 wt. % in isopropanol

Poly(2,6-dimethyl-1,4-phenylene oxide) Mₙ 20,000

Poly(2,6-dimethyl-1,4-phenylene oxide) powder

Poly(2-(diethylamino)ethyl methacrylate) average Mₙ 10,000

Poly(2-(dimethylamino)ethyl methacrylate) average Mₙ 10,000

Poly(2-acrylamido-2-methyl-1-propanesulfonic acid) solution average Mw 2,000,000, 15 wt. % in H₂O

Poly(2-acrylamido-2-methyl-1-propanesulfonic acid-co-acrylonitrile) acrylonitrile ~95 wt. %

Poly(2-dimethylamino)ethyl methacrylate) methyl chloride quaternary salt

Poly(2-ethyl-2-oxazoline) 5-7 cSt

Poly(2-ethyl-2-oxazoline) average Mw ~500,000, PDI 3‑4

Poly(2-ethyl-2-oxazoline) average Mₙ 10,000, PDI ≤1.5

Poly(2-ethyl-2-oxazoline) average Mₙ 20,000, PDI <1.4

Poly(2-ethyl-2-oxazoline) average Mₙ 5,000, PDI ≤1.3

Poly(2-ethylhexyl acrylate) solution average Mw ~92,000 by GPC, in toluene

Poly(2-hydroxyethyl methacrylate) average Mᵥ 1,000,000

Poly(2-hydroxyethyl methacrylate) average Mᵥ 20,000

Poly(2-hydroxyethyl methacrylate) average Mᵥ 300,000, crystalline

Poly(2-hydroxyethyl methacrylate) BioReagent, powder, suitable for cell culture

Poly(2-methacryloyloxyethyl phosphorylcholine) Mₙ 9000

Poly(2-methyl-2-oxazoline), hydroxy terminated average Mₙ 5,000, PDI <1.3

Poly(2-vinylnaphthalene) average Mw ~175,000

Poly(2-vinylpyridine) analytical standard, average Mw 159,000 (Typical), average Mₙ 152,000 (Typical)

Poly(2-vinylpyridine) analytical standard, average Mw 37,500 (Typical), average Mₙ 35,000 (Typical)

Poly(2-vinylpyridine-co-styrene) average Mₙ ~130,000, average Mw ~220,000 by LS, granular

Poly(3,4-ethylenedioxythiophene) hydrate nanotubes

Poly(3,4-ethylenedioxythiophene) nanoparticles, dispersion, in H₂O

Poly(3,4-ethylenedioxythiophene), bis-poly(ethyleneglycol), lauryl terminated 0.8 wt. % (dispersion in propylene carbonate), contains perchlorate as dopant

Poly(3,4-ethylenedioxythiophene)-block-poly(ethylene glycol) solution 1 wt % dispersion in nitromethane, contains perchlorate as dopant

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) 0.8% in H₂O, conductive inkjet ink

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) 1.3 wt % dispersion in H₂O

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) 2.7 wt % dispersion in H₂O

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) 5.0 wt. %, conductive screen printable ink

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) dry re-dispersible pellets

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) high-conductivity grade, 1.1% in H₂O, surfactant-free

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) high-conductivity grade, 1.5% in H₂O, neutral pH

Poly(3-butylthiophene-2,5-diyl) regioregular

Poly(3-decylthiophene-2,5-diyl) regioregular, average Mw ~42,000, average Mₙ ~30,000

Poly(3-dodecylthiophene-2,5-diyl) regioregular, average Mw ~60,000

Poly(3-hexylthiophene-2,5-diyl) regioregular

Poly(3-hexylthiophene-2,5-diyl) regioregular

Poly(3-hexylthiophene-2,5-diyl) regioregular, average Mw 20,000-45,000

Poly(3-hydroxybutyric acid) average Mₙ 10,000